ELECTRONIC SPEED CONTROL — IF EQUIPPED
When engaged, the Electronic Speed Control takes over accelerator operations at speeds
greater than 25 mph (40 km/h).
The Electronic Speed Control buttons are located on the right side of the steering wheel.
NOTE:
In order to ensure proper operation, the
Electronic Speed Control system has been
designed to shut down if multiple Speed
Control functions are operated at the same
time. If this occurs, the Electronic Speed
Control system can be reactivated by push-
ing the Electronic Speed Control ON/OFF
button and resetting the desired vehicle set
speed.
To Activate
Push the ON/OFF button to activate the
Electronic Speed Control. The Cruise Indi-
cator Light in the Electronic V ehicle Infor-
mation Center (EVIC) or Driver Information
Display (DID) will illuminate. To turn the
system off, push the ON/OFF button a sec-
ond time. The Cruise Indicator Light will
turn off. The system should be turned off
when not in use.
WARNING!
Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou
could accidentally set the system or cause it to go faster than you want. You could lose
control and have an accident. Always leave the system OFF when you are not using it.
Electronic Speed Control Switches
1 — Push CANCEL
2 — Push ON/OFF
3 — Push Resume/Accel
4 — Push Set/Decel
OPERATING YOUR VEHICLE
40
To Next Page
Loading...
Need help?
General
