Accessory Positions With Engine Off
NOTE:
The following functions are with the driver’s foot OFF the brake pedal (transmission in
PARK or NEUTRAL position).
Starting With The Ignition Switch In The OFF Position:
• Push the ENGINE STAR T/STOP button once to change the ignition switch to the ACC
position.
• Push the ENGINE STAR T/STOP button a second time to change the ignition switch to
the ON/RUN position.
• Push the ENGINE ST ART/STOP button a third time to return the ignition switch to the
OFF position.
NOTE:
If the ignition switch is left in the ACC or
ON/RUN (engine not running) position and
the transmission is in PARK, the system will
automatically time out after 30 minutes of
inactivity and the ignition will switch to the
OFF position.
Ignition Positions
GETTING STARTED
13
To Next Page
Loading...
Need help?
General
