5. Twist the pole in a clockwise rotation until it stops.
Note: You will hear an audible click when the lock
button engages the base.
6. Place the table top over the installed pole aligning
with the mating feature of the underside of the table top.
Apply pressure on the table tom and press downward.
Note: You will hear an audible click when the table
latch engages the pole.
WARNING!
Failure to comply with the following conditions
could result in serious injury or even death.
•
DO NOT install the table while vehicle is in
motion
•
NEVER drive the vehicle with only the pole in-
stalled
•
DO NOT place heavy or sharp objects on table.
•
DO NOT place liquid drinks on the table, use
available cupholders.
•
Second Row seats must be locked in the rearward
facing position before installing the table.
1 - Table Base 2 - Base Lock/Release Button
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149
3
To Next Page
Loading...
