To remove the console use the following procedure:
1. Open the console lid and remove the storage tray.
2. Pull up on the release handle located inside the floor
console, and slide the console rearward to disengage
from the floor.
3. Remove the floor console.
To reinstall the console, open the console lid and remove
the storage tray. Pull up on the release handle and slide
the console forward to engage the front of the console
into the floor tray. Pivot the floor console down until it is
seated on the floor tray and release the handle. Pull up on
the console to be sure it is firmly attached.
1 - Removal Latch 4 - Front Cupholders
2 - Lower Compartment Latch 5 - Top Storage Tray
3 - Upper Compartment Latch 6 - Rear Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209
3
To Next Page
Loading...
