4. When the compact spare tire/cover assembly is clear
of the vehicle, stand the tire/cover assembly upright and
remove the wheel spacer by squeezing the two retaining
tabs together.
5. There are two jack engagement locations on each side
of the body. These locations are on the sill flange of the
body and consist of a pair of down-standing tabs. The
jack is to be located, engaging the flange, between the
pair of tabs closest to the wheel to be changed. Place the
wrench on the jack screw and turn to the right until the
jack head is properly engaged in the described location.
Do not raise the vehicle until you are sure the jack is
securely engaged.
Squeezing Winch Retainer Tabs
WHAT TO DO IN EMERGENCIES 393
6
To Next Page
Loading...
