16 GETTING TO KNOW YOUR INSTRUMENT PANEL
1/4 Mile (400 meters) Timer
Best
Last
Recent
Reaction Timer
Braking Distance
Distance
From Speed
Current G-Forces
Peak G-Forces
Lap Timer
Lap History
Will list the last five laps with the best lap
highlighted in green.
Top Speed
Diagnostics — If Equipped
This feature allows the driver to view engine and
emission vehicle faults.
Push OK to have the most recent fault code
sent.
There is a delay when the next diagnostic
code is requested during which the following
message is displayed:
“Checking System for Diagnostic Codes.”
Driver must push the OK button again to see
the next Pcode otherwise current message
remains displayed.
Driver exits when they cycle to another
submenu (up or down).
Faults are displayed from newest to the
oldest.
If the menu is exited before the end of codes
is reached - when the driver re-enters the list
will be restarted from the beginning.
When no codes are present or the last code
is reached = (P0000) and this message is
displayed:
“No or End of Diagnostic Codes.”
Speed Warning — If Equipped
Push and release the up or down arrow
button until the Speed Warning Menu icon/title
is displayed in the instrument cluster display.
Push and release OK to enter speed warning.
Use the up or down arrow button to select
a desired speed, then push and release OK to
set the speed. The white passive speed limiter
telltale will light up with a notification text
message (Speed Warning Set to XX), followed by
the selected unit. When the set speed is
exceeded, a continuous chime will sound until
the speed is no longer exceeded. The white
passive speed limiter telltale will turn yellow
and will flash, and a pop-up message of “Speed
Warning Exceeded” will display.
NOTE:
You can turn the Speed Warning off by using the
up or down arrows to scroll through
speed list and select OFF at the bottom of the
list.
21_LALD_SU_EN_USC_t.book Page 16
To Next Page
Loading...
