64 MULTIMEDIA
LAUNCH CONTROL— IF EQUIPPED
AUTOMATIC TRANSMISSION — IF
E
QUIPPED
Launch Control is only available when the
following procedure is followed:
1. Press the Drive Modes button, then press
the Race Options button, then press the
Launch Control button to begin the
process.
NOTE:
Pushing the SRT button on the center stack or
pressing the Apps button on the touchscreen
are two other options to access Launch Control
features Ú page 53.
2. Slide the RPM slider bar on the
touchscreen. This screen will allow you to
adjust your launch RPM’s for optimum
launch/traction. If Launch Control is already
activated, you will need to deactivate it to
adjust the slider.
RPM Slider Bar
3. Press “Activate Launch Control”.
4. Make sure the vehicle is not moving.
5. Make sure the steering wheel is pointing
straight.
6. Hold the brake firmly and make sure the
vehicle is in DRIVE.
7. While holding the brake, rapidly
(within 0.25 seconds) apply and hold the
accelerator pedal to wide open throttle. The
engine speed will hold at the RPM that was
set in the “Launch RPM Set-Up” screen.
NOTE:
Messages will appear in the instrument cluster
to inform the driver if one or more of the above
conditions have not been met.
8. When conditions 4 through 7 have been
met, the instrument cluster display will read
“Launch Ready Release Brake”.
9. Keep the vehicle pointed straight.
21_LALD_SU_EN_USC_t.book Page 64
To Next Page
Loading...
