334 SERVICING AND MAINTENANCE
Dark Vapor Chrome, Black Satin Chrome, or
Low Gloss Clear Coat Wheels
SNOW TRACTION DEVICES
Use of traction devices require sufficient
tire-to-body clearance. Due to limited clearance,
the following snow traction devices are
recommended. Follow these recommendations
to guard against damage.
Snow traction device must be of proper size
for the tire, as recommended by the snow
traction device manufacturer.
No other tire sizes are recommended for use
with the snow traction device.
Please follow the table below for the recom-
mended tire size, axle and snow traction
device:
CAUTION!
If your vehicle is equipped with these
specialty wheels, DO NOT USE wheel
cleaners, abrasives, or polishing compounds.
They will permanently damage this finish and
such damage is not covered by the New
Vehicle Limited Warranty. HAND WASH ONLY
USING MILD SOAP AND WATER WITH A SOFT
CLOTH. Used on a regular basis; this is all that
is required to maintain this finish.
RWD
Trim Level
Axle Tire/Wheel Size
Snow Traction Device
(maximum projection beyond
tire profile or equivalent)
SXT
Rear
P215/65R17
P225/60R18
Peerless Chain Super Z6 Low
Profile or Equivalent
GT
R/T
225/60R18
18 x 7.5 x 24 mm
R/T SCAT PACK NONE
21_LD_OM_EN_USC_t.book Page 334
To Next Page
Loading...
