TECHNICAL SPECIFICATIONS 345
ENGINE FLUIDS AND LUBRICANTS
Cooling System*
3.6L Engine 10 Quarts 9.5 Liters
5.7L Engine – without Severe Duty II Cooling System 14.5 Quarts 13.9 Liters
5.7L Engine – with Severe Duty II Cooling System 15 Quarts 14.3 Liters
* Includes heater and coolant recovery bottle filled to MAX level
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km)
Formula OAT (Organic Additive Technology).
Engine Oil – 3.6L/5.7L Engine
We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of
FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix Ultra. Refer to your
engine oil filler cap for correct SAE grade.
Engine Oil Filter
We recommend you use a Mopar Engine Oil Filter. If a Mopar Engine Oil Filter is unavailable
only use filters that meet or exceed SAE/USCAR-36 Filter Performance Requirements.
Fuel Selection – 3.6L Engine 87 Octane (R+M)/2 Method, 0-15% Ethanol.
Fuel Selection – 5.7L Engine 89 Octane Recommended – 87 Octane acceptable (R+M)/2 Method, 0-15% Ethanol.
US Metric
9
21_LD_OM_EN_USC_t.book Page 345
To Next Page
Loading...
