FLUIDS, LUBRICANTS, AND GENUINE PARTS — DODGE
Important Information
CAUTION!
• Mixing of engine coolant (antifreeze) other than specified Organic Additive Technol-
ogy (OAT) engine coolant (antifreeze), may result in engine damage and may
decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is
different and should not be mixed with Hybrid Organic Additive Technology (HOAT)
engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze). If a
non-OAT engine coolant (antifreeze) is introduced into the cooling system in an
emergency, the cooling system will need to be drained, flushed, and refilled with
fresh OAT coolant (conforming to MS.90032), by an authorized dealer as soon as
possible.
• Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not
use additional rust inhibitors or antirust products, as they may not be compatible
with the radiator engine coolant and may plug the radiator.
• This vehicle has not been designed for use with propylene glycol-based engine
coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not
recommended.
Engine — 3.6L
Component Fluid, Lubricant, or Genuine Part
Engine Coolant W e recommend you use Mopar Antifreeze/
Coolant 10 Y ear/150,000 Mile Formula OAT
(Organic Additive Technology).
Engine Oil
W e recommend you use API Certified SAE
5W -20 Engine Oil, meeting the require-
ments of FCA Material Standard MS-
6395 such as Mopar , Pennzoil, and Shell
Helix. Refer to your engine oil filler cap for
correct SAE grade.
Engine Oil Filter
W e recommend you use a Mopar Engine Oil
Filter.
Spark Plugs W e recommend you use Mopar Spark Plugs.
Fuel Selection – 3.6L Engine 87 Octane, 0-15% Ethanol.
Fuel Selection – 3.6L Flex Fuel (E-85) En-
gine
87 Octane, Up to 85% Ethanol.
MAINTAINING YOUR VEHICLE
216
To Next Page
Loading...
