Reactive Head Restraints — Front Seats
The front driver and passenger seats are equipped with Reactive Head Restraints (RHR).
In the event of a rear impact, the RHRs will automatically extend forward minimizing the
gap between the back of the occupants head and the RHR.
The RHRs will automatically return to their normal position following a rear impact. If the
RHRs do not return to their normal position, see your authorized dealer immediately .
To raise the head restraint, pull upward on the head restraint. To lower the head restraint,
push the adjustment button located at the base of the head restraint and push downward
on the head restraint.
NOTE:
To remove the head restraint, raise it as far as it can go then push the release button and
the adjustment button at the base of each post while pulling the head restraint up. To
reinstall the head restraint, put the head restraint posts into the holes and push
downward. Then, adjust the head restraint to the appropriate height.
Adjustment Button
1 — Release Button
2 — Adjustment Button
GETTING STARTED
54
To Next Page
Loading...
