Auto-Down Feature
The driver's power window switch has an Auto-
Down feature. Push the window switch past the
first detent, release, and the window will go
down automatically.
To open the window part way, push the window
switch to the first detent and release it when you
want the window to stop.
To stop the window from going all the way down
during the Auto-Down operation, pull up on the
switch briefly.
Auto-Up Feature With Anti-Pinch Protection
On some models, the driver and front passenger
power window switches have an Auto-Up fea-
ture. Pull the window switch up to the second
detent, release, and the window will go up
automatically.
To stop the window from going all the way up
during the Auto-Up operation, push down on the
switch briefly.
To close the window part way, pull the window
switch up to the first detent and release it when
you want the window to stop.
NOTE:
• If the window runs into any obstacle during
Auto-Closure, it will reverse direction and then
go back down. Remove the obstacle and use
the window switch again to close the window.
• Any impact due to rough road conditions may
trigger the Auto-Reverse function unexpect-
edly during Auto-Closure. If this happens, pull
the switch lightly to the first detent and hold to
close window manually.
WARNING!
There is no anti-pinch protection when the
window is almost closed. To avoid personal
injury, be sure to clear your arms, hands,
fingers, and objects from the window path
before closing the window. Such entrapment
may result in serious injury.
Window Lockout Switch
The window lockout switch on the driver's door
trim panel allows you to disable the window
control on the rear passenger doors. To disable
the window controls, push and release the win-
dow lockout button (setting it in the down posi-
tion). To enable the window controls, push and
release the window lockout button again (set-
ting it in the up position).
Power Window Lockout Button
43
To Next Page
Loading...
