1
Ensure to use the correct mains voltage as givenin
2.“MACHINEOVERVIEW” onpage 5. Connectpowerplug to
mains powersocket. Press ON/ OFF icon. Machine moves
automaticallyto preparinga beverage position.
2
While machine is heatingup, ON / OFF icon starts blinking
red. After approx. 30 seconds, ON/ OFF iconlights up steady
green. Machine is ready to use.
3
Rinse watertank manually with freshdrinking water. Fill
watertank withfresh drinking water. Insert water tank into
machine.
4
Makesure that rinsingtool is incapsule holderand capsule
holderis in machine. Place an empty large container under-
neath the coffee outlet.
5
Start rinsingwith cold water: Setbar display to maximum
level with touchvolume selector. Touch coldwater icon.
Machine starts rinsing. Lights onbar display vanish pro-
gressively.
6
Waituntil countdownis finished and machine stops.
7
Continuerinsing with hot water. Set bar display to maximum
level with touchvolume selector. Touch hot watericon.
Machine starts rinsing. Lights onbar display vanish pro-
gressively.
8
Waituntil countdownis finished and machine stops.
9
Removerinsing tool. Warning: Hot water! Handle with care!
Empty container. Fill watertank withfresh drinking water.
Insertwater tank into machine. Place drip grid on driptray.
Reinsertdrip tray.
9
5. FIRST USE
To Next Page
Loading...
