To Next PageTo Next PageHow to fix insufficient power in Dolmar PS-400?
If your Dolmar Chainsaw has insufficient power, the possible causes include a dirty air filter, incorrect carburetor adjustment, clogged muffler, clogged exhaust channel in the cylinder, or a clogged spark arrester screen. To resolve this, clean the air filter and muffler, adjust the carburetor, and ensure the exhaust channel and spark arrester screen are clear.
What to do if Dolmar Chainsaw starts, but dies immediately?
If your Dolmar Chainsaw starts but dies immediately, it could be due to a wrong idling adjustment, or a dirty suction head or carburetor. Adjust the idling and clean the suction head or carburetor. Other potential issues include a defective tank venting system, an interrupted fuel line, a defective cable, or a defective STOP switch. Inspect and fix the tank venting, fuel line, cable, and STOP switch. For PS-341/PS-401 models, a dirty starting valve could also be the cause; clean the starting valve in this case.
How to fix no chain lubrication in Dolmar PS-400 Chainsaw?
If your Dolmar Chainsaw has no chain lubrication, it might be because the oil tank is empty or the oil guide groove is dirty. Refill the oil tank and clean the oil guide groove to resolve this issue.
Details the scope of warranty and its duration.
Lists warranty-covered parts and how to obtain service.
Outlines owner duties and parts/conditions not covered.
Explains how to initiate a warranty claim and key considerations.
Lists all items included in the product package.
Explains the meaning of various safety symbols used in the manual.
Essential rules for safe operation by the user.
Additional important safety measures for all users.
Information on kickback angles and the operator's physical condition.
Details product compliance with safety standards.
Describes necessary attire and protective equipment for safe operation.
Guidelines for carrying and transporting the chain saw safely.
Step-by-step guide for mounting components and refueling.
Detailed instructions for starting the chain saw engine.
Covers idle speed, chain tension, and environmental factors.
Techniques for safe and effective cutting.
Explains how kickback occurs and its primary causes.
Tips for maintaining control during cuts to prevent accidents.
Discusses elements that affect the force and occurrence of kickback.
Practical steps and techniques to prevent kickback incidents.
How to avoid pushback and pull-in reactive forces.
Factors to consider before starting to fell a tree.
Steps for clearing the base and planning escape routes.
Instructions for creating the notch and making the felling cut.
Technique for felling trees larger than the guide bar.
Method for cutting large diameter timber safely.
Safe practices for cutting logs and removing branches.
Essential rules for maintaining the saw and its safety features.
Procedures for cleaning, lubricating, and storing the saw.
Labels and descriptions for all major parts of the chain saw.
Information found on the saw's identification plate.
Specifications for different chain saw models.
Recommended guide bars and chains for safety and performance.
Step-by-step instructions for attaching the guide bar and chain.
Procedure for properly tightening the saw chain.
How to verify correct chain tension.
How to engage, release, and test the chain brake.
Instructions for safe fueling and correct fuel-oil mixture ratios.
Guidelines for selecting and using chain oil, including biodegradable options.
Essential safety measures to follow when refueling the saw.
Ensuring proper chain lubrication during operation.
Detailed steps for starting and stopping the engine safely.
Verifying the proper function of the chain brake and oil feed.
Instructions for adjusting the carburetor settings.
How to adjust the engine's idle speed for optimal performance.
Adapting the saw for low-temperature operation to prevent icing.
Indicators that the saw chain needs sharpening.
Detailed steps and angles for sharpening the saw chain.
Cleaning and lubricating the guide bar and its sprocket nose.
Cleaning the interior of the chain brake mechanism.
Instructions for replacing the saw chain and fuel filter suction head.
Checking and cleaning the spark arrester screen.
Procedures for cleaning the air filter and replacing the spark plug.
How to test the engine's ignition system.
A schedule of maintenance tasks based on usage frequency.
Guidance on service centers, spare parts, and warranty.
Importance of using genuine DOLMAR parts for optimal performance.
Diagnosing and resolving common malfunctions.
List of parts with corresponding DOLMAR numbers for ordering.
Information on optional accessories for the chain saw.
General
