Need help?Do you have a question about the Dolmar PS-45 and is the answer not in the manual?
General| Fuel Tank Capacity | 0.47 L |
|---|---|
| Oil Tank Capacity | 0.27 L |
| Bar Length | 45 cm |
| Chain Pitch | 0.325" |
| Chain Gauge | 0.050" |
List of items included in the delivery package.
Explanation of symbols used in the manual and on the saw.
User must read manual for correct operation & safety.
Essential gear for head, eyes, hands, feet, and hearing.
Safe handling and mixing of gasoline and two-stroke oil.
Understanding and preventing dangerous kickback situations.
Safe operating practices and techniques for chainsaw use.
Step-by-step guide for attaching the guide bar and chain.
Instructions for setting correct chain tension using the adjuster.
How to verify correct chain tension by hand.
Explanation of the inertia chain brake system and its function.
Details on gasoline type, mixing ratios, and storage.
Recommended chain oils and their properties for lubrication.
Procedure for safely refilling fuel and chain oil tanks.
Ensuring sufficient chain oil during operation for lubrication.
Method to check if the chain oiling system is working correctly.
Step-by-step guide for starting the chain saw engine.
Procedures for turning off the engine on PS-34 and PS-45 models.
How to test the chain brake's immediate stopping function.
Information regarding carburetor adjustment by service center.
How to adjust the engine's idle speed using the adjusting screw.
Guidelines for safely switching off and carrying the chain saw.
Proper methods for storing the chain saw, including emptying tanks.
Identification of all parts of the chain saw with numbered references.
How and when to sharpen the saw chain for optimal performance.
Procedure for cleaning internal parts of the chain brake mechanism.
Steps for cleaning the guide bar and lubricating the sprocket.
Instructions for removing and installing a new saw chain.
Procedure to replace the fuel suction head filter.
How to clean the air filter for proper engine operation.
Guide on how to remove and replace the spark plug.
Method to test if the spark plug is producing a spark.
Schedule and tasks for regular chain saw maintenance.
Common malfunctions, observations, and their causes.
List of available spare parts and their corresponding numbers.
To Next Page
