Need help?Do you have a question about the Dolmar PS-350 C and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Chain Pitch | 3/8 inch |
| Power Rating | 1.7 kW |
| Bar Length | 35 cm (14 inches) |
| Chain Gauge | 1.3 mm (0.05 inch) |
| Oil Tank Capacity | 0.28 liters |
Details the mandatory personal protective equipment (PPE) required for chainsaw operation to prevent injuries.
Covers essential information on the correct fuel mixture, handling precautions, and safe refuelling procedures.
Guides the user through initial setup, checks, and safe starting procedures for the chainsaw.
Explains the dangerous phenomenon of kickback and provides rules to prevent it during operation.
Step-by-step instructions for attaching the guide bar and saw chain using the universal wrench.
Instructions on how to properly tension the saw chain using the chain tensioning screw and retaining nuts.
Procedure for attaching the guide bar and saw chain on QuickSet models.
Details the process for tensioning the saw chain on QuickSet guide bar models.
Steps for installing the guide bar and saw chain on models with a quick tensioner.
Procedure for tensioning the saw chain using the quick tensioner mechanism.
Explains the function and importance of the inertia chain brake.
Details correct gasoline and two-stroke oil mixing ratios for optimal engine performance and environmental protection.
Step-by-step instructions for safely refuelling the chain saw with fuel mixture and chain oil.
Instructions on how to set the oil pump feed rate for optimal chain lubrication.
Detailed steps for safely starting the engine in cold and warm conditions.
Procedure for testing the functionality of the chain brake before each use.
Guidance on adjusting the carburetor settings, emphasizing the need for a tachometer and specialist intervention.
Detailed guide on how to properly sharpen the chainsaw chain for optimal cutting performance.
To Next Page
