Dolmar PS-352 - User Manual

Questions and Answers

W
williambakerAug 19, 2025
Why does my Dolmar Chainsaw engine not start?
- W
  wsmithAug 19, 2025
  If your Dolmar Chainsaw engine won't start, there are several possible causes: * A spark plug malfunction: Check the spark plug. * The fuel tank is empty: Fill the fuel tank. * A fuel supply problem: Check whether the fuel filter is not clogged. * Tool malfunction: Ask your local authorized service center for repair.
A
Anthony JohnsonAug 21, 2025
Why Dolmar Chainsaw engine does not start?
- T
  teresamoonAug 21, 2025
  Several factors can prevent your Dolmar Chainsaw engine from starting. It could be due to a spark plug malfunction, which requires checking the spark plug. Another reason might be an empty fuel tank, so ensure you fill it. Also, a clogged fuel filter can cause fuel supply problems. If none of these resolves the issue, it might be a tool malfunction.
S
Stephanie MeyerAug 23, 2025
What to do if there is no oil on the Dolmar Chainsaw chain?
- C
  Cheryl BaileyAug 23, 2025
  If there's no oil on the saw chain of your Dolmar Chainsaw, the possible causes are: * The oil tank is empty: Fill the oil tank. * The oil guide groove is dirty: Clean the groove. * Oil delivery is not adjusted properly: Adjust the amount of oil delivery. * Oil pump malfunction: Ask your local authorized service center for repair.
C
carolyn20Aug 26, 2025
How to fix Dolmar PS-352 Chainsaw chain that does not run?
- D
  Devin OrtizAug 26, 2025
  If the Dolmar Chainsaw chain does not run, it is likely that the chain brake is engaged. Release the chain brake.
L
Laura MckinneyAug 28, 2025
What to do if Dolmar Chainsaw has insufficient performance?
- D
  Danielle BrownAug 28, 2025
  If your Dolmar Chainsaw isn't performing well, start by checking the air cleaner; it might be dirty and need cleaning or replacing. Also, a dirty cylinder space can cause this issue, so clean it. Low environmental temperatures can also affect performance; adjust the carburetor shutter setting accordingly.
N
Nancy KaneAug 30, 2025
What to do if Dolmar Chainsaw has no oil on the saw chain?
- B
  Bradley FrazierAug 30, 2025
  If there's no oil on the saw chain of your Dolmar Chainsaw, first check if the oil tank is empty and fill it if needed. Also, a dirty oil guide groove can cause this, so clean the groove. Check the oil delivery if it is not adjusted properly and adjust the amount of oil delivery.
R
Ryan PatelSep 1, 2025
Why is my Dolmar Chainsaw performance insufficient?
- R
  ryan31Sep 2, 2025
  If your Dolmar Chainsaw is not performing well, it could be due to: * A dirty air cleaner: Clean the air cleaner or replace it if necessary. * A dirty cylinder space: Clean the cylinder space. * Very low environment temperature: Change the shutter setting of the carburetor. See section “Prevention from carburetor icing”.
C
Connie SanchezSep 4, 2025
What to do if the Dolmar PS-352 Chainsaw chain does not stop with the brake?
- A
  Angela HendersonSep 4, 2025
  If the Dolmar Chainsaw chain does not stop even when the chain brake is activated, stop using the tool immediately, and ask your local authorized service center for repair, because the brake band may be worn down.
M
Mrs. Shannon Olson PhDSep 6, 2025
Why does my Dolmar PS-352 Chainsaw vibrate abnormally?
- M
  Matthew ClarkSep 6, 2025
  If your Dolmar Chainsaw vibrates abnormally, it might be due to: * Loose guide bar or saw chain: Adjust the guide bar and saw chain tension. * Tool malfunction: Stop using the tool immediately, and ask your local authorized service center for repair.
J
Jessica MartinezSep 8, 2025
What to do if the Dolmar PS-352 Chainsaw chain does not stop when engine is idle?
- K
  kelleyjohnSep 9, 2025
  If the Dolmar Chainsaw chain does not stop when the engine is idle, it could be due to: * Idle speed being too high: Correct the idle speed. * Clutch defect: Stop using the tool immediately, and ask your local authorized service center for repair.