Dolmar PS-352 - Technical Data

10
Model PS-352 PS-352 TLC
Overall length (without guide bar) mm 388
Net weight kg 4.2
Stroke volume cm
3
35.2
Bore mm 38
Stroke mm 31
Max. power at speed kW/min
-1
1.7/10,000
Max. torque at speed Nm/min
-1
2.0/7,000
Idling speed/max. engine speed with bar and chain min
-1
2,900/13,500
Clutch engagement speed min
-1
4,100
Carburetor Type Diaphragm
Spark plug Type NGK BPMR 8Y
Electrode gap mm 0.7
Fuel tank capacity cm
3
310
Chain oil tank capacity cm
3
260
Mixture ratio (fuel/two stroke oil)
Dolmar genuine oil or quality grade JASO FC (ISO EGC)
or upper
50:1
Chain brake Engages manually or in case of kickback.
Chain speed m/s 25.3
Sprocket pitch mm (inch) 0.95 (3/8)
Number of teeth Z 6
Sound pressure level at the workplace L
PA, eq
per
ISO 22868
1)
dB (A) 99
K
PA
2.5
Sound power level L
WA, Fl + Ra
per ISO 22868
2)
dB (A) 111
K
WA
2.5
Vibration acceleration a
hv, eq
per
ISO22867
1)
front handle
m/s
2
3.3
K 2.0
rear handle
m/s
2
3.4
K 2.0
1) Figures derived in equal part from idling, full-load and racing speed.
2) Figures derived in equal part from full-load and racing speed.
• Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may differ from country to country.
Guide bar and saw chain
Guide bar type Sprocket nose bar
Length 350 mm 400 mm
Cutting length 325 mm 360 mm
Saw chain Type 492 (91PX)
Pitch 0.95 mm (3/8”)
Gauge 1.3 mm (0.05”)
No. of drive links 52 56
WARNING:
Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
TECHNICAL DATA