Dolmar PS-32PS-32 User Manual

PS-32
PS-32 TLC
PS-32 C
PS-32 C TLC
Original Instruction Manual
Instructions d’emploi d’origine
Originalbetriebsanleitung
Manuale di istruzioni originale
Originele gebruiksaanwijzing
Instrucciones de manejo originales
Instruções de serviço original
Original brugsanvisning
Πρωτότυπο εγχειρίδιο οδηγιών
Orijinal Kullanım Kılavuzu
Important: Read this instruction manual carefully before putting the petrol chain saw into operation and strictly observe the
safety regulations! Keep this instruction manual!
Attention: Veuillez lire attentivement ce mode d’emploi avant d’utiliser la tronçonneuse à chaîne et à essence et respectez
strictement les consignes de sécurité ! Conservez ce mode d’emploi !
Achtung: Lesen Sie vor Verwendung der Benzin-Motorsäge diese Betriebsanleitung aufmerksam durch, und halten Sie die
Sicherheitsbestimmungen strikt ein! Bewahren Sie diese Betriebsanleitung auf!
Attenzione: Leggere attentamente il presente manuale di istruzioni prima di mettere in funzione la motosega a benzina e
rispettare scrupolosamente le norme per la sicurezza. Conservare il manuale di istruzioni.
Belangrijk: Lees deze gebruiksaanwijzing aandachtig door voordat u de benzinekettingzaag in gebruik neemt en houd u te
allen tijde aan de veiligheidsinstructies! Bewaar deze gebruiksaanwijzing!
Atención: Es indispensable leer con mucha atención las instrucciones de manejo antes de utilizar la motosierra por
primera vez. ¡Preste especial aten ción a las recomendaciones de seguri dad! Conservar cuidadoso los instrucciones de
manejo.
Atenção: Leia cuidadosamente este manual de instruções antes de utilizar a moto-serra a gasolina e cumpra todas as
normas de segurança! Guarde este manual de instruções.
Obs: Læs venligst denne betjeningsvejledning om hyg ge ligt inden den benzindrevne kædesav ta ge s i brug og overhold under
alle omstændig heder sikker heds reglerne. Opbevar betjenings vej ledning omhyggeligt.
Προτού να θέτετε για πρώτη φορά το βενζινοκίνητο αλυσοπρίονο σε λειτουργία, να διαβάζετε με προσοχή τις
προκείμενες οδηγίες χειρισμού και να τηρείτε οπωσδήποτε τις οδηγίες ασφαλείας! Ο οδηγίες χειρισμού να φυλάσσονται
σε ασφαλές μέρος!
Önemli: Benzinli ağaç kesim motorunu kullanmaya başlamadan önce bu kullanım kılavuzunu dikkatlice okuyun ve güvenlik
talimatlarını haryen takip edin! Bu kullanım kılavuzunu saklayın!
http://www.dolmar.com

Dolmar PS-32PS-32 Specifications

General

Power source	Petrol
Weight (without bar and chain)	4.1 kg
Chain Pitch	3/8 "
Type	Gas Chainsaw
Engine Displacement	32 cm³
Fuel Tank Capacity	0.4 l
Oil Tank Capacity	0.28 l
Bar Length	35 cm
Chain Gauge	0.050 inch

Summary

Delivery Inventory

Symbols

Safety Precautions

Intended Use

Defines the proper use and limitations of the power chain saw.

General Precautions

General safety rules and user responsibilities for operating the chain saw.

Protective Equipment

Lists and describes the essential personal protective equipment (PPE) for safe operation.

Fuels and Refuelling

Instructions on safe handling, mixing, and storage of fuel and oil.

Putting into Operation

Steps and precautions before starting the chain saw operation.

Kickback

Explains kickback and provides rules to prevent it.

Working Behavior and Method

Safe operating techniques and body positioning during use.

Transport and Storage

Guidelines for safely transporting and storing the chain saw.

Maintenance Overview

Overview of maintenance tasks and when to seek professional service.

First Aid

Procedures for immediate first aid in case of accidents.

Technical Data

Component Denomination

Putting into Operation

6a. Models with Fastening Nuts on Sprocket Guard

Instructions for models with specific guard fastening.

6b. For the QuickSet Guide Bar

Specific instructions for chain tensioning with a QuickSet guide bar.

6c. For Models with Quick Tensioner on Sprocket Guard (TLC)

Procedures for mounting and tensioning chains on TLC models.

6-5. Chain Brake

Explains the inertia chain brake and how to engage/release it.

6-6. Fuel

Details on fuel types, mixture ratios, and safe handling.

6-7. Chain Oil

Recommendations for chain oil types and proper lubrication.

6-8. Filling Fuel and Chain Oil

Steps for safely filling the fuel and chain oil tanks.

6-9. Checking Chain Lubrication

How to check if the chain lubrication is adequate.

6-10. Adjusting Chain Lubrication

How to adjust the oil pump feed rate.

6-11. Starting the Engine

Detailed instructions for starting the engine safely in different conditions.

6-12. Stopping the Engine

How to properly stop the engine and shut off ignition.

6-13. Checking the Chain Brake

Procedure for testing the chain brake functionality.

6-14. Adjusting the Carburetor

Guidance on adjusting the idle speed of the carburetor.

Maintenance

7-1. Saw Chain Sharpening

Detailed guide on how to sharpen the saw chain correctly.

7-2. Cleaning the Inside of the Sprocket Guard

Instructions for cleaning the sprocket guard interior.

7-3. Cleaning the Guide Bar

How to clean and inspect the guide bar for damage.

7-4. Replacing the Saw Chain

Steps for safely removing and installing a new saw chain.

7-5. Cleaning the Air Filter

How to clean the air filter for optimal engine performance.

7-6. Replacing the Spark Plug

Procedure for replacing the spark plug.

7-7. Ignition Spark and Muffler Screw Checks

Checks for ignition spark and muffler screw tightness.

7-9. Starter Cable and Spring Replacement

Procedures for replacing starter cable, return spring pack, and starter spring.

7-10. Fan Housing and Air Filter Compartment Cleaning

Steps for mounting fan housing and cleaning related compartments.

7-12. Cylinder Fins and Suction Head Maintenance

Cleaning cylinder fins and replacing the suction head.

Periodic Maintenance Instructions

Service, Spare Parts and Guarantee

Troubleshooting

Spare Parts List Extract

EC Declaration of Conformity