38
EU Conformity Declaration
The undersigned, Tamiro Kishima and Rainer Bergfeld, as authorized by DOLMAR GmbH, declare that the DOLMAR machines,
Type: 194, 195
Chain saw EU prototype test certiÞ cate No.
PS-350, PS-350 C (194) M6T 09 10 24243 106
PS-420, PS-420 C (195) M6T 09 10 24243 106
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045 Hamburg, Germany, conforms to the basic safety and health require-
ments of the applicable EU Directives:
EU Machinery Directive 2006/42/EG.
EU EMC Directive 2004/108/EG.
Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 11681-1, EN ISO
14982, CISPR 12.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured noise level (L
wa
) is 111,7 dB(A). The
guaranteed noise level (L
d
) is 113 dB(A).
The EU Type-Examination Certificate was performed by: TÜV Product Service GmbH, Zertifizierstelle, Ridlerstr. 31,
D-80339 Munich.
The technical documentation is on Þ le at DOLMAR GmbH, Jenfelder Strasse 38, Department FZ, 22045 Hamburg, Germany.
Hamburg, 4.11.2009
For DOLMAR GmbH
Tamiro Kishima Rainer Bergfeld
Managing Director Managing Director
To Next Page
Loading...
