Dolmar PS-350 C - Accessories

37
Extract from the spare parts list
Use only original DOLMAR parts. For repairs and
replacement of other parts, see your DOLMAR service centre.
PS-350, 350 C
PS-420, 420 C
Pos. DOLMAR-No. Qty. Denomination
1 412 030 661 1 Sprocket nose bar 3/8”, 30 cm (12”)
412 035 661 1 Sprocket nose bar 3/8”, 35 cm (14”)
412 040 661 1 Sprocket nose bar 3/8”, 40 cm (16”)
1 412 030 061 1 Sprocket nose bar 3/8”, 30 cm (12”)
412 035 061 1 Sprocket nose bar 3/8”, 35 cm (14”)
412 040 061 1 Sprocket nose bar 3/8”, 40 cm (16”)
2 528 092 746 1 Saw chain 3/8“ for 30 cm
528 092 752 1 Saw chain 3/8“ for 35 cm
528 092 756 1 Saw chain 3/8“ for 40 cm
1 414 033 141 1 Sprocket nose bar .325”, 33 cm (13”)
414 038 141 1 Sprocket nose bar .325”, 38 cm (15”)
414 045 141 1 Sprocket nose bar .325”, 45 cm (18”)
2 512 484 756 1 Saw chain .325“ for 33 cm
512 484 764 1 Saw chain .325“ for 38 cm
512 484 772 1 Saw chain .325“ for 45 cm
3 952 010 130 1 Chain protector for 30-35 cm (3/8”)
952 010 140 1 Chain protector for 40 cm (3/8”)
952 020 130 1 Chain protector for 33 cm (.325”)
952 020 140 1 Chain protector for 38-45 cm (.325”)
4 941 719 131 1 Universal wrench SW 19/13
5 940 827 000 1 Offset screwdriver
6 944 340 001 1 Carburetor screwdriver
7 320 163 447 1 Suction head
8 181 114 202 1 Fuel tank cap, cpl.
9 963 229 036 1 O-Ring 29,3 x 3,6 mm
10 195 160 050 1 Return spring pack, complete
11 195 160 030 1 Spring
12 195 160 020 1 Driver
13 195 160 060 1 Starter cable 3,5x900 mm
14 965 603 021 1 Spark plug
15 181 114 202 1 Oil tank cap, cpl.
16 963 229 036 1 O-Ring 29,3 x 3,6 mm
17 195 173 150 1 Air Þ lter (ß eece)
17 195 173 050 1 Air Þ lter (nylon)
18 195 213 101 1 Sprocket guard, cpl.
195 213 150 1 Sprocket guard (with fast tensioner), complete
19 923 208 004 2 Hexagonal nut M8
20 181 223 311 1 Clutch drum cpl. .325“, 7-tooth
195 223 310 1 Clutch drum cpl. 3/8“, 6-tooth
21 181 224 081 1 Cup washer
22 927 408 000 1 Circlip
23 963 220 013 1 O-Ring 20 x 1,3 mm
Accessories (not delivered with the chain saw)
25 953 100 090 1 Chain gauge
26 953 004 010 1 File handle
27 953 003 100 1 Round Þ le, dia. 4,5 mm
28 953 003 070 1 Round Þ le, dia. 4,8 mm
29 953 003 090 1 Round Þ le, dia. 4,0 mm
30 953 003 060 1 Flat Þ le
31 953 030 030 1 File holder 3/8“
32 953 030 030 1 File holder .325“
33 950 233 210 1 Tachometer
- 949 000 035 1 Combined can
(for 5l fuel, 2.5l chain oil)