Technical data Sigma Plus
•
6 spring mounted, massive tumblers in axial order at each lock side
•
Consisting of 12 sectionally graded core and body pins
•
Massive pin tumblers with a minimum diameter of 2.7 mm, made of hard bronze /
steel, hardened and chemically nickel-plated
•
Smallest lock unit with the pin tumblers, massive solid pin with a minimum height
of 0.8 mm
•
Waisted core and body pins
•
Truncated conical pin heads for securing the block and lock function of the clo-
sure mechanism
•
One-piece cylinder body made of massive brass, surface electro-plated in sev-
eral steps, high protection against corrosion, optional modular design
•
Cylinder core made of massive brass, one-piece, with a minimum diameter of 13
mm
•
Curved core head with guide funnel and core head groove for the positive trans-
mission of torque during opening and closing.
•
Paracentric core and key profile in two parts
•
One-piece key bit made of sintered steel
•
Key made of nickel silver, free of corrosion
•
Vertical keyway
•
Up to 18-fold lock authorisation query for each individual key
•
Uniform surface of the key with optimised angled cuts of the flank angles
•
Trademark protection
•
Resistant against impact picking by modified shape of the tumbler pins
To Next Page
