Page 10 of 14
7 Care and Cleaning
• Turn off and unplug the unit prior to cleaning.
Note:
When changing the filter it is also recommended to wash the water tanks
and the Float Components.
• Use warm water with mild detergent to clean the Water Tanks, Float
components and lid then rinse and dry.
• To clean the Chiller Unit, wipe over with a soft damp cloth and mild
detergent then wipe dry.
• Never spray the unit with liquids or submerge in water or any other liquid.
• Do not use flammable liquids, chemicals, abrasive creams, steel wool or
scouring pads for cleaning.
• Do not place parts in a Dishwasher.
• The filter will require changing every 2 - 3 months depending on use.
Filters can be purchased through stores or by contacting the distributor.
8 Spare Parts
Spare Water Filters can be purchased from H.E. Group’s friendly customer
service team on our toll free number:
1800 079 124 or via email info@hegroup.com.au
Read and Save These Instructions
To Next Page
Loading...