Dometic 10 Series User Manual

EN
RMD10 Technical description
23
Activating/deactivating the frame heater
The refrigerator has a frame heater in the area of the display to reduce condensation.
I
➤ Select the setup menu.
➤ Activate/deactivate the frame heater .
➤ Confirm the setting with .
Switching off the acoustic signal for error messages and warning
messages
➤ Select the setup menu.
➤ Activate .
➤ Confirm the setting with .
5.4 RMD10.5 and RMD10.5X
Control and display elements
The RMD10.5 and RMD10.5X refrigerator has an LED display and a control knob in
the divider between the main compartment (fig. 4, page 5).
The LED display has the following operating and display elements:
NOTE
• In gas mode, the frame heater must be activated manually via the
setup menu.
• A permanently switched on frame heater can lead to a faster dis-
charge of the battery.
No. in
fig. 4, page 5
Description
1 ON/OFF button
2 Fault indication
3 Operating with DC power supply
4 Gas operation
50'2:(67ERRN6HLWH'RQQHUVWDJ0DL

Dometic 10 Series Specifications

General

Type	Absorption
Energy Source	12V DC, 230V AC, Gas
Features	LED lighting
Climate Class	T (Tropical)
Door	Single door, left or right hinged (model dependent)