Dometic 310 Series - Components; Installation

6
4.4 Rough-in dimensions (g.
3
, page 3)
Ref.
Dimensions/Description
Model 310 Model 320
A 10 in. / 254 mm 11 in. / 279 mm
B Floor ange
C 11 in. / 279 mm 11 in. / 279 mm
D 11 in. / 279 mm 11 in. / 279 mm
E Left wall
F Back wall
G Right wall
5 Components (g.
1
, page 3)
Ref. Description
A Toilet seat
B Flush ball seal
C Toilet bowl
D Toilet base
E Flush pedal
F Floor ange seal
Ref. Description
G Vacuum breaker cover
H Vacuum breaker
I Water valve
J Floor mounting hardware kit
Refer to complete parts list (available online at
www.dometic.com) for additional information.
6 Installation
Note
Be sure foot pedal, when pressed, touches same at surface on which toilet is installed.
Note
Be sure to follow recommended installation requirements in section 4.2 of this manual.
6.1 Tools required
• pliers or adjustable wrench
• 7/16-in. / 11 mm wrench
Dometic Gravity-Flush ToiletSpecifications / Installation