To Next PageTo Next PageWhat to do if my Dometic Air Conditioner does not operate?
If your Dometic Air Conditioner isn't working, the circuit breaker may have activated. Try setting or resetting the circuit breaker. Alternatively, a fuse may have blown, in which case you should replace the fuse.
General| Power Source | 115V AC |
|---|---|
| Hertz | 60 Hz |
| Cooling Capacity | 15, 000 BTU |
| Installation Type | Roof-mounted |
| Fan Speed | 3 |
Alerts users to potential physical injury hazards using the safety alert symbol.
Identifies safety messages and property damage messages, indicating hazard degree.
Provides directives to reduce accident and injury risks during installation, operation, or service.
Highlights critical warnings for electrical shock, fire, and explosion hazards.
Lists recommended tools and materials for installation.
Explains where to find model and serial number identification labels.
Identifies the main components of the ADB kit.
Details dimensions and clearances for the Freshjet rooftop unit.
Details dimensions and clearances for the Brisk Air rooftop unit.
Details dimensions and clearances for the Brisk II rooftop unit.
Details dimensions and clearances for the Blizzard NXT rooftop unit.
Details dimensions and clearances for the High Performance rooftop unit.
Details dimensions and clearances for the Penguin rooftop unit.
Details dimensions and clearances for the Penguin II rooftop unit.
Presents the internal dimensions of the ADB component.
Details acceptable tilt allowances for rooftop component placement.
Guides users on factors to consider for selecting the appropriate cooling capacity.
Details the process of preparing the RV roof for unit installation.
Instructions for preparing the roof opening when an existing vent is present.
Instructions for creating a new roof opening if no existing vent is available.
Provides instructions on how to route the power supply wiring.
Guides the placement of the rooftop unit onto the prepared roof opening.
Explains how to fit foam dividers based on roof thickness using selection tables.
Illustrates mounting patterns and bolt placement for unit security.
Specifies the correct torque for tightening mounting bolts.
Details how to connect the 115 VAC power supply wires from the rooftop component and the AC.
Provides instructions for periodic removal, washing, and drying of the air filter.
Details how to clean the ADB housing and control panel with a soft cloth.
