Operation CF35, CF40, CF50
16
➤ Press the “ON/OFF” button (fig. 3 1, page 3) for between one and two
seconds.
✓ The “POWER” LED lights up.
✓ The display (fig. 3 5, page 3) switches on and shows the current cooling
temperature.
I
✓ The cooler starts cooling the interior.
I
Locking the cooler (CF35, CF40)
➤ Close the lid.
➤ Press the lock (fig. 2 1, page 3) down, until it latches in place audibly.
6.6 Setting the temperature
➤ Press the “SET” button (fig. 3 4, page 3) once.
➤ Use the “UP +” (fig. 3 6, page 3) and “DOWN –” (fig. 3 7, page 3) buttons to
select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
NOTE
When operating with the battery, the display switches off automatically
if the battery voltage is low. The LED “POWER” flashes orange.
CF35-CF50-O-US.book Seite 16 Mittwoch, 10. Mai 2017 6:20 18
To Next Page
Loading...
