Dometic CFF SERIES - Replacing the DC Plug Fuse; Replacing the Light PCB

EN
CFF45 Operation
21
➤ Replace the defective fuse with a new fuse of the same type (Automotive
Standard blade fuse, 10 A).
➤ Re-fit the rubber cover.
➤ Reconnect the power supply to the device.
7.12 Replacing the DC plug fuse
➤ Unscrew the contact pin housing (3) from the plug (1).
➤ Replace the defective fuse (2) with a new fuse of the same type and rating (3AG,
Fast Acting, 10 A).
➤ Re-assemble the plug in reverse order.
7.13 Replacing the light PCB
1 2 3
0
3.
2.
1.
a
CFF-45--O-EN-AUS.book Seite 21 Montag, 25. Juni 2018 12:42 12