Dometic CFX 100W - 7.14 Replacing the DC cable fuse; 7.15 Replacing the light PCB

EN
Operation CFX100W
26
7.14 Replacing the DC cable fuse
➤ Disconnect the power supply from the cooler.
➤ Remove the protective cover (2)
➤ Replace the defective fuse (1) with a new fuse of the same type and rating
(Automotive standard blade fuse, 15 A).
➤ Refit the protective cover.
➤ Reconnect the power supply to the cooler.
7.15 Replacing the light PCB
➤ Disconnect the power supply to the device.
➤ Pry out the transparent cover with a screwdriver (1).
➤ Unscrew the PCB mounting screws (2).
➤ Pull out the plug from the PCB (3).
a
1
2
1.
2.
3.
b
CFX-100W--O-EN-AUS.book Seite 26 Donnerstag, 13. Juli 2017 10:12 10