Dometic CI-21 - Safety Information and Symbols; Recognize Safety Information; Understand Signal Words

2
EN
Contents Induction Cooktop
1 Explanation of Symbols and Safety
Instructions ............................ 2
1.1 Recognize Safety Information .............2
1.2 Understand Signal Words ................2
1.3 Supplemental Directives .................3
1.4 General Safety Messages ................3
2 General Information ..................... 5
2.1 Product Specifications ..................5
2.2 Product Description ....................5
2.3 Control Panel ..........................5
3 Intended Use ........................... 5
4 Installation ............................. 6
4.1 Assembling the Induction Cooktop ........6
4.2 Installing the Induction Cooktop ..........6
5 Operation .............................. 7
5.1 Using the Touch Controls ................8
5.2 Plugging In the Induction Cooktop ........9
5.3 Turning the Induction Cooktop On ........9
5.4 Putting the Pot on the Ceramic Plate .......9
5.5 Using Temperature Mode ................9
5.6 Using Heating Mode ....................9
5.7 Using the Timer .......................10
5.8 Locking the Control Panel ..............10
5.9 Switching the Induction Cooktop Off .....10
5.10 Using Compatible Cookware ............10
6 Cleaning and Maintaining the Induction
Cooktop .............................. 10
7 Troubleshooting ....................... 12
8 Disposal .............................. 13
Limited Two-Year Warranty ................. 13
Contents
Service Center & Dealer Locations
Visit: www.dometic.com
Read all instructions carefully.
These instructions MUST stay with this product.
1 Explanation of Symbols and
Safety Instructions
This manual has safety information and instructions to
help you eliminate or reduce the risk of accidents and
injuries.
1.1 Recognize Safety Information

This is the safety alert symbol. It is used to alert
you to potential physical injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
1.2 Understand Signal Words
A signal word will identify safety messages and property
damage messages, and also will indicate the degree or
level of hazard seriousness.

DANGER!
Indicates a hazardous situation that, if not avoided,
will result in death or serious injury.

WARNING
Indicates a hazardous situation that, if not avoided,
could result in death or serious injury.

CAUTION
Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
NOTICE: Used to address practices not related to
physical injury.
I
Indicates additional information that is not related
to physical injury.