CoolFreeze Operation
9
6Operation
The cooling device is equipped with an LED interior light that remains on when the
voltage is applied. The energy consumption of the LED interior light is extremely low
and is negligible compared to the total energy consumption of the device.
6.1 Before initial use
I
6.2 Energy saving tips
•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow warm food to cool down first before placing it in the device to keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the lid open for longer than necessary.
•
Defrost the cooling device as soon as a layer of ice forms.
•
Avoid unnecessarily low temperature settings.
6.3 Latching the lid
➤ Close the lid.
➤ Press the latch (fig. 3 1,page 9) down, until it latches in place audibly.
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (see also
chapter “Cleaning and maintenance” on page 16).
CF11-O-AUS.book Seite 9 Donnerstag, 14. Juni 2018 1:41 13
To Next Page
Loading...
Need help?
General