Operation CoolFreeze
10
6.4 Connecting the cooling device
The cooler can be operated with 12 Vg or 24 Vg or 100 – 240 Vw.
A
➤ Place the cooler on a firm base.
Make sure that the ventilation slots are not covered and that the heated air can be
dissipated.
Using the fused DC plug
A
I
NOTICE! Danger of Damage!
•
Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
•
Overvoltage can damage the electronics of the device.
NOTICE! Danger of damage!
For protection of the device the DC cable supplied includes a fuse inside
the plug. Do not remove the fused DC plug.
Only use the DC cable supplied.
NOTE
If you connect the cooler to the DC socket, remember that the ignition
must be turned on to supply it with power.
CF11-O-AUS.book Seite 10 Donnerstag, 14. Juni 2018 1:41 13
To Next Page
Loading...
Need help?
General