Dometic DM2652 - Ice Cubes; Airing Position

ICE CUBES
lce
cubes
can be
made
in the freezer compartment.
For
faster
freezing,
place
trays
in
direct
contact
with the bottom
of the
freezer compartment.
RM2351, RM2454, RM2554, DM2662,
DM2663,
DM2862
& NDM1062
lce will
be made more rapidly if the
thermostat
is
set
at its
highest
position,
but be sure to move
the thermostat back
to normal
setting when ice is
formed; the
refrigerator might
othenvise become too cold.
fiF
1.
Shut
off
the refrigerator
by
pressing
the
main
^v
power
ON/OFF
button
(OFF
position).
2.
Empty the
refrigerator.
3. Leave
the cabinet and
freezer doors
open and
make sure
the drip
tray is in
place
under
the
finned evaporator.
5
Defrosting time
can be
reduced by
filling ice trays
\/
with hot water
and
placing
them in the freezer
com-
pafiment.
FIRE
AND INHALATION
HAZARD.
Do not use
a knife,
ice
pick,
or any other
sharp tool
to
remove
frost
from the
freezer compartment.
Failure to obey
this
warning could
cause
a
leak in the
ammonia
cooling
system
which
could
lead to a
fire
hazard
resulting
in
death
or serious
injury.
An ammonia
leak also
poses
an
inhalation
hazard, and
could
cause
chemical
burns
to
the skin
and eyes.
Exposure
to a
high con'
centration
of ammonia
could
result
in death
or serious
injury.
Do not use
a hot air
blower
to
remove
frost
from the
freezer
compartment.
Permanent
damage
could
result from
warping the
metal
or
plastic
parts.
4. When all
the frost
has melted, dry
the interior
with a
clean cloth
and turn
the refrigerator
back
on.
RM2354, RM2454,
RM2554,
DM2662,
DM2663,
DM2862
& NDM1062
5. Set
the
thermostat
to the coldest setting
for
a
few hours.
Then,
reset the thermostat
to the
desired
setting,
usually
at mid setting.
Replace
food after
refrigerator
has reached
appropriate
cool
temperature.
DEFROSTING
AIRING POSITION
DM2652, DM2662, DM2663,
DM2852 &
DM2862
Use the airing
position
card
to
keep
the doors ajar if the
refrigerator
is
put
in storage
or will not be
used
for an ex-
tended
period
of
time.
:
&
L