18
Fig. 24
6
Fig. 23
1
Mode
Press button "1" several times until the indica-
tor LED "6" GAS illuminates.
The device is now in manual gas mode. When
you select the automatic mode (the display
shows AU), GAS is only selected as energy opti-
on according to the sequence of priority when
none of the two electrical types of power supply
is available.
Fig. 26
6
Fig. 25
6
In automatic mode, AU and the currently used
type of power supply (e.g. GAS) are indicated
alternately.
Switching over to a manual energy selection is
possible at any time.
Fig. 22
F
1. Press button "1" several times until the indica-
tor LED (F) illuminates.
2. The ignition process is activated automatical-
ly by means of an automatic igniter.
The ignition system will make 2 ignition attempts
with 25 seconds interval when the burner fails to
light. If repeated attempts fail to start the opera-
tion, a fault is indicated (
please refer to failure
indication
).
MES Appliances AES Appliances
Fig. 21
1
Mode
Refrigerator operation
To Next Page
Loading...
