27
4.14 Information on failure display
and trouble-shooting
4.14.1 Status messages on the display
1
3
1 = Indicator LED failure
2 = Operating mode display
3 = Temperature level display
Display :
Failure :
MES
AES
Fig. 51
LED is flashing
230V mode: "230V" not available or voltage too
low
"230" is flashing
LED is flashing
12V mode: "12V" not available or voltage too low
"12" is flashing
LED is flashing
GAS/Auto mode: Flame not ignited
"GAS" is flashing
All temperature setting
LEDs are flashing
Temperature sensor defective, refrigerator works
on mid temperature setting
All temperature setting
LEDs are flashing
LED + all tempe-
rature setting
LEDs are flashing
230V - Heating element defective
"HE1" is flashing
LED + all tempe-
rature setting
LEDs are flashing
12V - Heating element defective
"HE2" is flashing
Fig. 50
1
3
2
2
Refrigerators with an electronics system
(MES, AES) indicate the occurence of a mal-
function by the LED or display flashing.
If a malfunction occurs, the indicator LED
"Failure" (1) flashes simultaneously. In the
case of AES models an acoustic alarm
sounds.
Refrigerator operation
To Next Page
Loading...
