Dometic RM2350 - APPENDIX A - SHELF REPLACEMENT; Removing and Replacing Shelves

13
APPENDIX A - REMOVING AND REPLACING THE SHELVES
Put a screwdriver into the slot of the shelf lock.
Turn the screwdriver counterclockwise.
Remove the shelf locks from the wire shelf.
Slide the wire shelf to the left.
The right-hand side of the shelf will come loose.
Lower the right-hand side of the wire shelf and
let the left-hand side slide out of the holes in the
wall.
Slide the plastic plugs into the holes of the wall.
Snap the shelf locks onto the wire shelf.
Slide the shelf into the holes on the right-hand
side.
Insert the ends of the wire shelf on the left-hand
side at the desired position.
General instruction. The number of shelves and position may vary between different refrigerator models.