This program will address the most common system problems associated with the Sunchaser Awnings supplied
by The Dometic Corporation. Our intent is to provide you with a guideline of checks to make, should you
encounter one of the following symptoms.
SYMPTOM
1.
Black adjustment knob will not tighten
2.
Fabric leaks at the roller tube
3.
Main support arms will not extend
4.
Awning has bulges or wrinkles where pull strap
roils up
5.
Awning fabric will not roll up straight
6. Fabric wrinkled.
CAUSE
REFER TO
Hexnut
1.1
Stitches
2.6
Push button assembly
1.2
Adjustable arm assembly
1.3
Operation
3.1
Fabric position
2.1
Out of square
2.2
Straight
4.1
Tek screws
2.8
Out of square
2.2
7.
Fabric does not hang well
Out of square
2.2
Tube deflection
2.3
Tek screws
2.8
Straight
4.1
Stitches
2.6
8.
Must lift main arm(s) to open or close the awning
9.
Awning arm(s) stay up against side of house when
trying to open awning
10. Awning will not roll up
11. Awning will not stay in rolled down position
stop plug
1.6
Bottom mounting brackets
1.5
Top mounting bracket
1.4
Fabric position
2.1
Operation
3.1
Rafters
1.7
Cam 2.5
Black adjustment knob
1.8
Torsions
2.4
Cam
2.5
12. Water leaks through fabric
Fabric
2.7
1
To Next Page
Loading...
Need help?
General
