Safety instructions BordBar TB08
6
!
CAUTION!
• Disconnect the cooling appliance from the mains
– Before cleaning and maintenance
–After use
• Food may only be stored in its original packaging or in suitable
containers.
A
NOTICE!
• Check that the voltage specification on the type plate is the same as
that of the power supply.
• Only connect the cooler to the DC socket in the vehicle using the DC
connection cable.
• Only connect the device as follows:
– Plug the DC connection cable into the on-board socket in the
vehicle
– Or plug the AC connection cable into the AC mains
• Only use the AC connection cable to connect the device to the AC
mains.
• Never pull the plug out of the socket by the connection cable.
• If the cooler is connected to the AC socket: disconnect the refrigerator
and other electric consumers from the battery before connecting the
quick charging device.
• If the cooler is connected to the DC socket: disconnect the refrigerator
or switch it off when you turn off the engine. Otherwise you may dis-
charge the battery.
• The cooling device is not suitable for transporting substances which
are caustic or contain solvents.
TB08-O-AU.book Seite 6 Freitag, 7. Oktober 2016 12:55 12
To Next Page
Loading...
