BordBar TB08 Safety instructions
7
2.2 Operating the cooler safely
D
DANGER!
• Do not touch exposed cables with your bare hands. This applies
especially when operating the device from the AC mains.
!
CAUTION!
• Before starting the device, ensure that the power supply line and the
plug are dry.
A
NOTICE!
• Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for that purpose.
• Do not place the cooling appliance near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
• Danger of overheating!
Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Make sure that the cooling appliance is
sufficiently far away from walls and other objects so that the air can
circulate.
• Ensure that the ventilation openings are not covered.
• Do not fill the inner container with ice or fluid.
• Never immerse the cooling appliance in water.
• Protect the cooling appliance and the cable against heat and
moisture.
TB08-O-AU.book Seite 7 Freitag, 7. Oktober 2016 12:55 12
To Next Page
Loading...
