9
press the MENÜ-key
select “EXTRA”
HISTORY (see chapter “Alarm history” for further details)
SHOW HISTORY Display for alarm situations. With the aid of the UP- and
DOWN buttons you can scroll down the list
DELETE HISTORY
DELETE HISTORY:
NO
YES YES : deletes the entire history data.
BUZZER
VOLUME
BUZZER VOLUME Setting the volume of the acoustic alarm signal
MUTE TIME
MUTE TIME : 0 60 On the occurrence of an alarm, the acoustic signal can
be switched off for a given time by activating the ENTER
button. The given time is determined by this parameter.
It can be changed from 0 to 60 minutes in stages of1I
minute.
DISPLAY Setting the parameters for the display
BRIGHTNESS
DISPLAY BRIGHTNESS
-
■
+ Setting the brightness with the and keys.
CONTRAST
DISPLAY CONTRAST
-
■
+ Setting the contrast with the and keys.
POS / NEG
POSITIVE NEGATIVE Changing the display from positive (blue/white) to
negative display (white/blue).
BACKL. TIMEOUT
TIME OUT: : 0 127 Duration of the display indication on pressing the button
during a power failure.
(100 = approx. 10 Sec, 50 = approx. 5 Sec.)
(see chapter “
Alarm situations
”)
TThhee ““EEXXTTRRAA”” -- MMeennuu
• The “EXTRA” menu only contains parameters without influence on the function of
the appliance and are therefore accessible for any use without a password.
USER PASSWORD Changing the password to access the “SETTINGS”
MENU.
CHANGE USER PASSWORD:
0XXX
XXXX Enter the new password twice and confirm.
CALIBRATION This function is for calibrating the sensors. As each
setting in the calibration compromises the function of
the appliance, this function is protected by a password
in the factory and must only be used by trained service
staff!
CALIBRATION PASSWORD:
0XXX Enter the password to the calibration menu
To Next Page
Loading...
Need help?
General