To Next PageTo Next Page
Need help?Do you have a question about the Dometic VacuFlush VHT12 and is the answer not in the manual?
General| Flush System | Vacuum |
|---|---|
| Model | VHT12 |
| Bowl Shape | Elongated |
| Voltage | 12 V DC |
| Installation | Floor Mount |
| Vent | 1.5 inch (38 mm) |
| Water Consumption per Flush | 0.5 gal (1.9 l) |
Details the key features of the Dometic Vacuum Holding Tank system.
Identifies components of the vacuum holding tank itself.
Lists components related to the connected VacuFlush toilet system.
Details the materials used for the holding tank and fittings.
Outlines the electrical requirements and ratings for the unit.
Provides physical dimensions of the vacuum holding tank unit.
Specifies the capacity and weight of the vacuum holding tank.
Guidance on selecting the optimal installation location for the VHT.
Instructions for properly routing sanitation and vent hoses.
Considerations for making holes through bulkheads during installation.
Advice on hose placement relative to heat sources.
Steps for making the necessary plumbing and electrical connections.
Procedure for initial system start-up and priming.
Describes standard flushing action and tank full indicators.
Steps for safely emptying the vacuum holding tank.
Instructions for cleaning the vacuum holding tank.
Procedure for preparing the unit for winter storage.
Details the one-year limited warranty for North America.
