EPT076596 Issue 1 – March 2022
35
System Display
USB Connectivity
For both download and upload connectivity the machine
must be on before inserting USB drive (USB max size 16Gb
with no other files on the drive and formatted to FAT32).
Once turned on The DPX3500 will allow data to be uploaded
or downloaded to/from the system providing the machine is
not running:
• Upload
o Configuration files (Supplied by Domino)
o Software updates (Supplied by Domino)
• Download
o System data file
The DPX3500 will allow the user to choose between
uploading or downloading data. If no upload data is
detected to install the DPX3500 will only allow the user to
download:
Both options available
Data detected – download available
If the user selects ‘Install’ in the ‘Upload/Download’
selection screen they will be navigated to the ‘Upload
Selection’ screen. There will be two types of upload
available:
• Configuration Data: Configuration parameters for
unit
• Software: Software update file
The DPX3500 will read the data on the attached memory
stick and enable the file choice icon if corresponding file
discovered:
'Upload' Screen – Software and Config file detected
To Next Page
Loading...
