Domino F Series User Guide

40
Creating and Editing a Message
Add Text
(1) Select Messages > New Message or Settings > Message Editor
to open the Message Editor.
(2) Press on the screen within a specific area of the Message Editor
where you require the item to appear. A cross hair will appear at
this location.
(3) Select the Add icon.
The Add sub-menu displays.
(4) From the sub-menu select the Text icon.
Note: Change keyboards by selecting the appropriate Alternative
Keyboard icon at the bottom of the text entry screen.
(5) Enter the required text using the keyboard and select the green
tick icon when finished.
(6) To change text, select the text item and then the Keyboard icon
on the Edit sub-menu.
(7) To change text parameters (Object Name, Position, Bold, Width
etc.), use the sub-menu (Font, Alignment) or select More…
(8) To delete an object, select the object and select the delete
icon of the Edit menu
(9) Activate the message for printing by sending it to the printer
via the File menu
Text Barcode
(MRC)
Image Arc
Rectangle
Clone Item

Domino F Series Specifications

General

Brand	Domino
Model	F Series
Category	Measuring Instruments
Language	English