47
Add a New Link
To add a new link to the message:
(1) Press on the screen within a specific area of the Message Editor
where you require the item to appear. A cross hair will appear at
this location.
(2) Select the Add icon.
(3) From the sub-menu select the Add Text icon.
(4) Select +Variable > +Create New > Link.
(5) Enter a name or use the default name for the link object.
(6) Specify the source of the link, e.g. a counter or a clock or
message content element. System variables are entered into a
message via a link.
(7) Select the green tick icon to enter the offset clock into the
message. The link object will have the same content as the
source object.
(8) Activate the message for printing by sending it to the printer
via the File menu .