23. Select the Print icon to load the label to the print group.
24.
Select START to begin printing.
Note
Do not remove the USB drive during printing. If the USB drive is removed, the
controller will be unable to continue printing the data.
End of procedure.
LANGUAGE AND KEYBOARD SETUP
To setup the user interface's language and keyboard layout:
1. Select Home > Setup > Regional > Language and keyboard.
2. Define the settings listed below:
• Language
• Keyboard layout
•
Input method (IME)
•
Primary currency
3.
Select Home > Setup > Printer configuration > Power options > Restart.
End of procedure.
DATE AND TIME
The controller's date and time can be set manually or synchronised with an NTP (Network Time
Protocol) server.
INSTALLATION
99 EPT053091 - Issue 5 - 07 May 2021
To Next Page
Loading...