To Next PageTo Next PageWhy is my Domus UDTT-25 not drying properly?
If your Domus Dryer isn't drying clothes adequately, try these steps: First, increase the cycle time. Then, ensure sufficient airflow by cleaning the fluff filter. Also, check that the output pipe is clean and unblocked, and clean the fan-extractor blades. Consider whether the outlet conduit is too long, and ensure the room has enough fresh air inlets.
What to do if my Domus UDTT-25 Dryer does not start?
If your Domus Dryer won't start, make sure the timer isn't set to 0 and select a correct time. Ensure the door and filter are fully closed. Verify that the dryer has a power supply by checking the condition of the fuses and that the mains voltage is correct.
How to fix a Domus UDTT-25 that is not heating?
If your Domus Dryer is not heating up, it might be in Cool-down mode; to return to heating, increase the time. Otherwise, check the thermostat and the control electronic plate. You may also need to check the safety thermostat and reset the GAS alarm, if applicable.
Essential safety guidelines for operating the dryer, including precautions and usage.
Technical overview and physical dimensions of the different dryer models.
List of tools necessary for the proper installation of the dryer.
Guidelines for selecting an appropriate location, including space and levelling.
Instructions for setting up the air exhaust and fresh air intake for optimal performance.
Procedures and requirements for safely connecting the dryer to the main power supply.
Steps for connecting gas models to propane or natural gas supply.
Procedure for changing injectors and converting the dryer for different gas types.
Explanation of the microprocessor control system and user interaction.
Details on the electronic control's components, modes, and indicators.
Step-by-step guide on how to start and operate a drying cycle.
Identification and resolution of common alarms and warning indicators.
Description of the different screens available on the touch control interface.
Details on the 'Screen Off' and 'Main Screen' modes in OPL operation.
Explanation of the 'Run Screen' interface and its functionalities in OPL mode.
Screens for selecting programmes and payment in self-service mode.
Description of the run screen interface for self-service machines.
Options for managing and creating drying programmes.
Settings for language, date, units, and other system parameters.
Step-by-step guide for running a drying cycle in OPL mode.
Step-by-step guide for running a drying cycle in self-service mode.
Procedures for stopping or confirming the end of a drying cycle.
List and descriptions of all possible alarms and warnings displayed by the machine.
Instructions for accessing and cleaning the fluff filter for optimal performance.
Guidelines for cleaning the heating battery components.
Maintenance checks for fan blades and transmission belts.
Information on how to contact technical support for service or parts.
A table listing common problems, their causes, and solutions.
Information on the proper disposal of the machine according to European regulations.
General
