Domus UDTT-25 - Finishing a Drying Cycle

8.1. How to finish drying
• OPL Mode:
o Push STOP key (8)
o A confirmation message will be requested. To return to the current programme,
press the cross, and to confirm the detention of the programme press the tick.
• Self-service Mode:
o Push STOP key (8)
o A confirmation message will be requested. To return to the current programme,
press the cross, and to confirm the detention of the programme press the tick.
Press and hold if not within the grace period or this is deactivated (further
information in the Grace Period section 7.2. Configure system).
40