2. GENERAL SPECIFICATIONS
Our dryers in their different models and complements have been designed to meet the highest
operating, reliability, and drying capacity requirements.
The machine is standard equipped with the COOL DOWN (progressive cooling) system to avoid
burning when taking the load out and possible spontaneous combustion. It also prevents wrinkles in
delicate clothing.
Basic equipment:
• Gas, Electric or steam heating system.
• Radial-axial air flow system.
• Cool-Down system. (Configured)
• Drum rotation reversal.
• Stainless steel drum AISI 430.
• Electronic model: Control of temperature and drying time.
• TOUCH electronic model: Electronic control system using microprocessor with high
performance touch screen.
• Recirculating Model: Residual humidity control system with intelligent dry (variable speed or
throughout the cycle). Hot air recirculation system with progressive control via humidity sensor.
Comprehensive thermal insulation. Door with double glazing. Sprinkler system.
The TECNNICAL SPECIFICATIONS for each model are specified in the following table:
*(Recirculating option)