Donner DMK-25 - Product Features; Slider and Pedal Inputs; Keyboard Settings; Preset Management

5. S1~S4
©
Assignable Sliders, can be assigned to send CC message.
© Use the [S Bank] to switch Bank A or Bank B.
© The MIDI Channel is assignable for each of them . The range is 0~16 (the same as the
Touch Bar).
6. PEDAL
©
Assignable Pedal, can be assigned to send CC message.
© The MIDI Channel is assignable, The range is 0~16 (the same as the Touch Bar).
©
The Polarity of different pedals will be automatic recognized during the power on.
7. KEYBOARD
© The MIDI Channel is assignable, The range is
1~16;
©
4 touch Curve , The range is 0~3;
©
Use the [TRANSPOSE +/-] to change the pitch up/down by semi-tone, the range is -
12~12 . Press the [TRANSPOSE +] and the [TRANSPOSE -] at the same time will set
the transpose to 0;
© Use the [OCTAVE +/-] to change the pitch up/down by octave, the range is -3~3
.Press the [OCTAVE +] and the [OCTAVE -] at the same time will set the octave to 0;
©
Multi-Function for EDIT;
SAVE/LOAD
© 4 Program Presets, PROG1~PROG4.
©
LOAD
F Press [PAD BANK] and [PROGRAM] at the same time to enter the Loading state , the
LED of [PAD BANK] and [PROGRAM] blinking, press PROG1~PROG4 you want to
load the program preset , the PROG you press will lights if this PROG is not empty .
F It will exit the loading state 3 second later after you press(or not press) one PROG , or
you can press [PAD BANK] or [PROGRAM] to exit the loading state quickly.
©
SAVE
F
Press [K BANK] and [S BANK] at the same time to enter the Saving state , the LED of
[K BANK] and [S BANK] blinking, press PROG1~PROG4 you want to save the
parameter , the PROG you press will lights.
F
It will exit the saving state 3 second later after you press(or not press) one PROG , or
you can press [K BANK] or [S BANK] to exit the saving state quickly.