DoorHan DS Series User Manual

25
APPENDIX
Diagram for the pit preparation and installation of embedded parts for the dock leveler with integrated telescopic lip when used with vehicle without built-in lift
3
4
2
1
L
W
H
W
1200
H
L
L
L ,
3600
700 800 800
3100
W ,
H ,
2500×2000
2100
2500×2200
700 700
2030 2230
700
2600
3000×2000
3000×2200
3500×2000
3500×2200 4000×2000
4000×2200
800
700
800 700
3500×2000
3500×2200
4000×2000
4000×2200
800 800
DS252005-(06)E
DS252005-(10)E
DS252205-(06)E DS252205-(10)E DS302005-(06)E DS302005-(10)E DS302205-(06)E DS302205-(10)E DS352005-(06)E DS352005-(10)E DS352205-(06)E DS352205-(10)E DS402005-(06)E DS402005-(10)E DS402205-(06)E DS402205-(10)E
DS352010-(06)E DS352210-(06)E DS402010-(06)E DS402210-(06)E
3600
3100 2100 2600
2030 2230 2030 2230 2030 2230
3100
2600
3100 2600
2030
2230 2030 2230
L,
W,
H,
∅
0×100×
×75×
W
H
700 800
2500×2400
7002430
3000×2400
3500×2400
4000×2400
800
DS252405-(06)E DS252405-(10)E DS302405-(06)E DS302405-(10)E DS352405-(06)E DS352405-(10)E DS402405-(06)E DS402405-(10)E
3600
3100 2100 2600
2430 2430 2430
800
700
3500×2400 4000×2400
DS352410-(06)E DS402410-(06)E
3100 2600
2430 2430
— — — — — —
1300
160
R160
R160
450
50
∅
Size of the dock leveler pit (the lip 500 mm)
Size of the dock leveler pit (the lip 1000 mm)
Article of the dock
leveler series DS
with load
capacity 6 tones
Article of the dock
leveler series DS
with load
capacity 10 tones
Size of the dock
leveler
(length* x width),
mm x mm
Place for the control unit installation Place for the external hydraulic power station installation
View 1
View 1
View 1 View 2
View 3
View 2
View 2
Pipe 80 mm
View 2
View 1
View 3
Pipe Ø80 mm for cabling from hydraulic power
station to control unit or for laying hoses from
hydraulic cylinders to external hydraulic power
station. Bend with an angle 90 °. Bending radius
is more than 160 mm
Place
for the control
unit installation
Corner
Fitting 16 mm, step 300 mm
∅
Fitting 16 mm
∅
Fitting 16 mm
mm
Corner mm
×75×
Corner mm
Place for the external hydraulic
power station installation
The diagram for the pit preparation and installation of embedded parts for the dock leveler with integrated telescopic lip 2000 mm wide, 2500 mm long* and 700 mm high, when used with vehicle without built-in lift
Article of the dock
leveler series DS
with load
capacity 6 tones
Article of the dock
leveler series DS
with load
capacity 10 tones
Size of the dock
leveler
(length* x width),
mm x mm
* Dock leveler length – from the edge of opened lip to the dock leveler cover rotation axis. 1. 400 V (3 phases+neutral+ground) connect to the place of the control unit instal- lation for the dock leveler. 2. It is required to provide surface of 200x300 mm for the place of the control unit installation for the dock leveler. 3. In case of ordering the dock leveler with external hydraulic power station, it is required to provide surface of 350x600 mm. 4. It is required to provide surface for rubber bumpers installation. See Section “Optional Equipment”.

DoorHan DS Series Specifications

General

Brand	DoorHan
Model	DS Series
Category	Lifting Systems
Language	English